Electrical Transmission Towers
They are suitable for routes that need stable wire height, safe climbing parts, and reliable outdoor protection.
Electrical Transmission Towers are steel towers used to support overhead conductors and ground wires in power line projects. They keep the line at the required height and help maintain safe spacing between wires, ground, roads, trees, and nearby structures. The tower can be arranged for straight routes, angle points, crossings, and other common line positions according to the drawing.
Product Parameters
|
Parameter |
Details |
|
Material option |
Q235, Q345, or project-specified structural steel |
|
Tower form |
Lattice tower with angle steel or combined steel sections |
|
Anti-corrosion |
Hot-dip galvanized finish for outdoor use |
|
Connection |
Bolts, gusset plates, cross arms, and base plates |
|
Applicable line |
Transmission and distribution line support |
|
Custom scope |
Height, load, span, conductor spacing, and cross arm layout |
Components
1. Main legs and bracing members form the load-bearing body of the tower.
2. Cross arms hold insulator strings and keep each phase in the required position.
3. Base plates, bolts, and step bolts support assembly, fixing, climbing, and later checking.
Installation Notes
Check the foundation size, anchor bolt position, and part marks before lifting or assembly.
Do not damage the galvanized layer during transport and installation; touch-up treatment should be used when the surface is scratched.
Final verticality, bolt tightening, and grounding connection should be checked before the Electrical Transmission Towers enter service.
Our Services
Drawing-based production can be arranged after tower type, height, voltage, and line position are confirmed.
Packing lists and part marks can be prepared to make site checking easier before installation.
Electrical Transmission Towers can be supplied with galvanized parts grouped by tower section for clearer loading.
FAQ
Q: How should this product be selected?
A: Check the working place, size, material, load or pressure need, and the way it will be installed. A quick check before ordering helps avoid wrong size or wrong grade.
Q: Can the size or specification be adjusted?
A: Yes. The final size, thickness, length, surface, packing, or accessory list can be checked by order details and project use
Q: What should be checked before use?
A: Check the label, surface, quantity, connection points, and any parts that may be damaged during transport. If the product will be used in a hard site, a sample or drawing check is helpful first.
Hot Tags: electrical transmission towers, China electrical transmission towers manufacturers, suppliers, factory, 33kv lattice tower, 66kv tower, best rated power tower, high voltage transmission tower, lattice tower power lines, small power tower
You Might Also Like
Send Inquiry