Bionic Tree Communication Tower
A telecom mast is often the one thing a scenic area can't hide. The Bionic Tree Communication Tower solves that siting problem the direct way: it is a real single-tube tower, disguised to read as a living tree. Pine, camphor, coconut and palm silhouettes are built with sculpting and coating over the steel, so from the ground it reads as planting, not infrastructure. That is what gets a permit approved where a bare mast would be refused.
Structure and materials
A Bionic Tree Communication Tower is a tapered single tube standing on its own independent reinforced-concrete foundation - no shared footing, nothing leaning on surrounding ground, so uneven settlement under a tall slender column is avoided. Sections are joined with precision-machined internal flange connections, so concentricity and verticality hold over the full height - this removes the hidden risks that come with shell-piercing bolted joints. Feeder cables run inside the body and are fixed to internal clamps, out of wind, rain and direct sun - where feeder life is usually lost on open towers.
The steel is hot-dip galvanized first; the bark and foliage go on after. The artificial bark is a composite made for this job - waterproof, fire-resistant, UV-stable - so it does not crack or peel after a few seasons. The load path stays all-steel: the bark is cladding only, and climbing access is unchanged from a standard monopole.
Because the column is a single tapered tube, the footprint is only about 1–2 m², the foundation 4–6 m², and no compound wall is needed around the base. On town sites and leased land, that difference shows up directly in the land bill.
Specifications
|
Item |
Detail |
|
Tower form |
Tapered single tube, camouflaged as a tree |
|
Tree types |
Welcoming pine / camphor / coconut / palm, or per site |
|
Foundation |
Independent reinforced concrete, 4 – 6 m² |
|
Footprint |
1 – 2 m², no perimeter wall |
|
Section joints |
Precision-machined internal flanges |
|
Feeders |
Internal, held by fixing clamps |
|
Antenna mounting |
Concealed support frame among foliage |
|
Surface |
Hot-dip galvanizing + composite bark and foliage |
Where it is used
Scenic areas and parks where a conventional mast cannot be approved;
City parks, plazas and greenbelts;
Resorts, villages and sites near protected landscape.
Hot Tags: bionic tree communication tower, China bionic tree communication tower manufacturers, suppliers, factory, Comms Mast, communication antenna tower, microwave communication tower, mobile communications tower, radio communication tower, telecommunications tower
You Might Also Like
Send Inquiry